Stone-Like Paint Wall Cladding
Stone-Like Paint Wall Cladding is a kind of water-soluble coating product with decoration effect similar to marble, granite and other stones, which is composed of environmental protection acrylic resin, natural stone powder and auxiliary.
It applied to various exterior walls of building, and the ultra-durable decorative protective coating. It can greatly extend the service life of the building.
1. Excellent uv resistance and weather resistance;
2. Excellent stain resistance and corrosion resistance;
3. Color retention, anti-mist and moisture-proof;
4. Excellent decoration with slight extension, effectively covering small cracks and preventing them from cracking;
5. Excellent adhesion ability, and the dead weight is less than stone.
|No.||Insulation||External color||Appearance density (kg/m3)||Compressive strength (Mpa)||Dimensional Stability||Thermal conductivity (w/m.k)||Flammability||Water vapor permeability (ng/pa.m.s)|
|1||XPS||Light blue||Light blue||28.0 – 35.0||≤1.20||≤0.03||B1||≤3.0|
|2||PU||White||White||22.02 – 25.0||≤0.30||≤0.039||B1||≤3.0|
|3||TPS||White||White||30.0 – 32.0||≤0.3||≤0.036||B1||≤3.0|
|4||Rockwool||Dark yellow||Dark yellow||≥ 0.150||≤0.048||A||≤3.0|
|Panel length (mm)||2440|
|Panel width (mm)||1220|
|Surface Coating Choices||Natural stone||Imitatio stone||PVDF|
|Substrate thickness (mm)||6||8||10||12|
|Backboard thickness (mm)||4||4||5||5|
|Width tolerance (mm)||0.5/-0.5|
|Length tolerance (mm)||
First, check the grassroots level
After paint the wall of grassroots level, the outer surface should meet the following requirements:
1) dry and clean.
2) remove the bulge, empty part of the pine loose parts.
3) the surface may not have powder and peeling phenomenon.
Second, the bears separation
It should be set to vertical and horizontal line for the flat reference, according to the design layout of the separation program, pop up installation control line of each board.
Third, bore a hole to embedded expansion bolts
Segmented line play well, check correct, in accordance with the good split hole drilling embedded embedded expansion bolts.
Fourth, pre-installed anchor
The connection between the L-type anchor and the H-type pendant is secured to the wall by means of expansion bolts.
Fifth, the preparation of adhesive mortar
Proportionally formulated, good adhesion mortar should be used within 1.5 hours. The bonding area of insulation decorative board should not be less than 50%, adhesive distribution point use "point box method."
Sixth, bonding + anchoring
The outer side and the inside of the H-type pendant are respectively inserted in the side groove of insulation decorative board, it through the expansion bolt and the adhesive mortar fixed to the wall.
Seventh, fill the foam, paste the masking tape
Fill the foam strip in the divider and paste the tape on both sides of the seam.
Eighth, fill the silicone sealant
Squeeze the silicone sealant into the slit, the process of squeeze, the mouth should be inserted into the gap above 4mm, even slow moving.
Ninth, tear the masking tape, protective film
After silicone sealant neat scraping, and then stripped the masking tape, the protective film is strictly prohibited to tear before all the unfinished project, If the film is covered, it should be removed at the same time remove the scaffolding.
What kind of service does your company have?
1.Design - Customized design according to your needs.
2.Installation - Professional technical support to help with the installation.
3.After sales service - Whether you have a broken panel or simply want an upgrade, our team can expertly install your new door or lift system.
Is your company have distributors or agents worldwide?
We have cooperated with some retailers in different countries. This partnership means you can find a selection of attractive and high-quality wall cladding even didn't come to our factory.
Welcome if you are interested in cooperation or be one of our agents.
What's the monthly production of your doors?
50,000 square meter external wall cladding system and accessories.
Germany production line and improved manufacture progress to produce at 24 hours per day
Is your company supply samples or trial order?
BRD provides free samples for customers, and also support trial orders to start the cooperation business.
Do you have certificate to Europe countries?
CE International Certification
Passed Australia standard, sales net cover 12 Europe countries.